21 How to adjust the screen resolution
How to adjust the screen resolution
Due to the nature of liquid crystal display (LCD) technology, the picture resolution is always
fixed. The best possible picture for your FP72E/T721 is achieved with a resolution of 1280 x 1024.
This is called “Native Resolution” or maximal resolution – that is, the clearest picture. Lower
resolutions are displayed on a full screen through an interpolation circuit. Image blurring across
pixel boundaries can occur with the interpolated resolution depending upon the image type and
its initial resolution.
To take full advantage of LCD technology you should select the native resolution setting of
1280 x 1024.
1. Open Display Properties and select the Settings tab.
You can op en Display Properties by right-clicking on the Windows desktop and selecting Properties
from the pop-up menu.
2. Use the slider in the ‘Screen area’ section to adjust the screen resolution.
Select the recommended resolution of 1280 x 1024 then click Apply.
If you select some other resolution, be aware that this other resolution is interpolated and
may not accurately display the screen image as well as it could do at the native resolution
setting.
3. Click OK then Ye s .
4. Close the Display Properties window.
1
1
To Next Page
Loading...
Need help?
General
