35 Troubleshooting
If the LED is illuminated in orange, the power management mode is active. Press any button on
the computer keyboard or move the mouse. If that does not help, check the signal cable
connectors. If any pin is bent or broken off, please contact your dealer to get necessary support.
Is the prompt on the display not illuminated at all?
Check the power supply mains socket, the external power supply and the mains switch.
The image is distorted, flashes or flickers:
Read the
How to adjust the screen resolution on page 19 section and then select the correct
resolution, refresh rate and make adjustments based on these instructions.
The image is displaced in one direction:
Read the
How to adjust the screen resolution on page 19 section and then select the correct
resolution, refresh rate and make adjustments based on these instructions.
Need more help?
If your problems remain after checking this manual, please contact your place of purchase or
e-mail us at: Support@BenQ.com
To Next Page
Loading...
Need help?
General
