8 How to install your monitor hardware
Viewing Angle Adjustment
You may position the screen to the desired angle with -5° to +20° monitor tilt, 342° monitor
swivel, and 72 mm monitor height.
5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power point
and turn it on.
Turn on the monitor by pressing the power button on the
front of the monitor.
Turn on the computer too, and follow the instructions in
Section 4: Getting the most from your BenQ monitor to
install the monitor software.
The power point and plug shown are indicative only,
and may differ from that used in your region.
171
171
To Next Page
Loading...
Need help?
General
