7 How to install your monitor hardware
How to install your monitor hardware
If the computer is turned on you must turn it off before continuing. Do not plug-in or turn-on the
power to the monitor until instructed to do so.
1. Attach the monitor base.
Protect the monitor and screen by clearing a flat open area
on your desk and placing a soft item like the monitor
packaging bag on the desk for padding.
Lay the screen down on a flat clean padded surface.
Orient and align the stand base socket with the end of the
stand arm, then push the stand base until it locks into
place.
Carefully lift the monitor and place it upright on its stand
on a flat even surface.
You should position the monitor and angle the screen
to minimize unwanted reflections from other light
sources.
1
1
3
To Next Page
Loading...
Need help?
General
