42 How to adjust your Monitor
How to adjust your Monitor
A Look at the Control Panel
There are 6 keys for user’s control including “
iKey
”, “Exit”, “Enter”, “<” and “>” key and a power
swith. The following descriptions are the introduction of these keys & switch.
1. “Power”: Turn the power on or off.
2. “
iKey
” : Adjust vertical position, phase, horizontal position and pixel clock automatically.
3. “Exit” key: Back to previous menu or exit OSD.
4. “Enter” key: Activate OSD, enter sub menu, select items, confirm selection and hot key for OSD
Lock.
5. W (Left) key: For Left/Decrease adjustment. Left key is the hot key for Brightness and Contrast.
6. X (Right) key: For Right/Increase adjustment. Right key is the hot key for Brightness Level.
Hot Key Mode
Brightness and Contrast hot key
Press X to enter Brightness menu, press W or
X key to adjust the degree of brightness and
press “Exit” to exit OSD.
Press W to enter Contrast menu, press W or X
key to adjust the degree of Contrast and press
“Exit” to exit OSD.
8
To Next Page
Loading...
Need help?
General
