11 How to assemble your monitor hardware
3. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled
"POWER IN" on the rear of the monitor. Do not
connect the other end to a power outlet just yet.
4. Route the cables via the cable clip.
Release the cable retaining clip by squeezing the clip
inwards as illustrated. Position the cables together and
reinsert the clip over them to retain the cables neatly in
place behind the monitor stand.
5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power
outlet and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button on
the right of the monitor.
Turn on the computer too, and follow the instructions
in Getting the most from your BenQ monitor on page
14 to install the monitor software.
To extend the service life of the product, we recommend
that you use your computer's power management function.
To Next Page
Loading...
Need help?
General
