EasyManuals Logo

BenQ GL2460 User Manual

BenQ GL2460
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10 How to assemble your monitor hardware
Gently attempt to pull them back apart to check that
they have properly engaged.
Carefully lift the monitor, turn it over and place it
upright on its stand on a flat even surface.
You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
2. Connect the PC video cable
Do not use both DVI-D cable and D-Sub cable on the same
PC. The only case in which both cables can be used is if they
are connected to two different PCs with appropriate video
systems.
To Connect the D-Sub Cable
Connect the plug of the D-Sub cable (at the end
without the ferrite filter) to the monitor video socket.
Connect the other end of the cable (at the end with the
ferrite filter) to the computer video socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
To Connect the DVI-D Cable
Connect the plug of the DVI-D cable (at the end
without the ferrite filter) to the monitor video socket.
Connect the other end of the cable (at the end with the
ferrite filter) to the computer video socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
-5
O
~ +20
O
-5
O
~ +20
O
Either
Or

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BenQ GL2460 and is the answer not in the manual?

BenQ GL2460 Specifications

General IconGeneral
3DNo
Panel typeTN+Film
Pixel pitch0.276 x 0.276 mm
Screen shapeFlat
Response time2 ms
Display diagonal24 \
Display technologyLED
Maximum refresh rate- Hz
Viewing angle, vertical160 °
Contrast ratio (dynamic)12000000:1
Contrast ratio (typical)1000:1
Display number of colors16.7 million colors
Viewing angle, horizontal170 °
Display brightness (typical)250 cd/m²
Supported graphics resolutions1920 x 1080 (HD 1080)
DVI-I ports quantity0
Tilt angle range-5 - 20 °
Height adjustment-
Number of OSD languages17
On Screen Display (OSD)Yes
Panel mounting interface100 x 100 mm
AC input voltage96 - 264 V
Power consumption (standby)0.3 W
Power consumption (typical)23 W
CertificationTCO 6.0
Product colorBlack
Windows operating systems supportedWindows 7 Home Basic, Windows 7 Home Premium, Windows 7 Professional, Windows 7 Starter, Windows 7 Ultimate, Windows 8
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth (without stand)194 mm
Width (without stand)434 mm
Height (without stand)565 mm
Weight (without stand)4300 g

Related product manuals