40 Appendix: Assembling your monitor with a height adjustment stand (HAS)
How to detach the base
To move the monitor properly, you should extend the monitor to its maximum
height, then place one hand on the upper part of the monitor stand and the other
hand on the lower part of the stand as illustrated.
1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging
the power cable. Turn off the computer before
unplugging the monitor signal cable.
Gently lift the display up and extend the stand to the
maximum extended position.
Protect the monitor and screen by clearing a flat open
area on your desk and placing a soft item like a towel on
the desk for padding, before laying the screen face down
on a flat clean padded surface.
Please be careful to prevent damage to the monitor. Placing
the screen surface on an object like a stapler or a mouse will
crack the glass or damage the LCD substrate voiding your
warranty. Sliding or scraping the monitor around on your
desk will scratch or damage the monitor surround and
controls.
2. Release the thumbscrew on the bottom of
the monitor base and detach the monitor
base as illustrated.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
