BenQ LW600ST User Manual (English)

Other manuals for BenQ LW600ST

Questions and Answers:

L
larry60Aug 10, 2025
Why is there no picture on my BenQ LW600ST Projector?
- M
  Mark AndersonAug 10, 2025
  If there is no picture on your BenQ Projector, it might be due to several reasons: the video source might not be turned on or connected correctly, the projector might not be correctly connected to the input signal device, or the input signal might not be correctly selected. To resolve this, ensure the video source is on and the signal cable is properly connected. Check the connection between the projector and the input signal device. Use the SOURCE key to select the correct input signal.
M
Mario AlexanderAug 18, 2025
What to do if my BenQ LW600ST Projector does not turn on?
- K
  Kristen MurphyAug 18, 2025
  If your BenQ Projector doesn't turn on, there could be a few reasons. First, check the power cord to ensure it's properly plugged into both the projector's AC power jack and the power outlet, making sure the outlet switch is on. Also, if you've recently tried turning it on and it didn't work, wait until the cooling down process has completed before attempting to turn it on again.
L
Lisa GibsonAug 25, 2025
Why is my BenQ LW600ST Projector image blurred?
- J
  Jay BarkerAug 26, 2025
  A blurred image on your BenQ Projector can be caused by a few things. First, the projection lens might not be correctly focused; try adjusting the focus using the focus ring. Second, the projector and screen may not be properly aligned; adjust the projection angle, direction, and height if needed. Finally, make sure the lens cover is open.
S
sparksamandaSep 2, 2025
What to do if BenQ LW600ST remote control does not work?
- A
  Alexandra LesterSep 2, 2025
  If your BenQ Projector's remote control isn't working, try these steps: Replace both batteries with new ones. Make sure there is nothing blocking the path between the remote control and the projector. Ensure you are within 8 meters (26 feet) of the projector.