BenQ SW271C - User Manual

Recycle Disassemble Instruction
(Dismantled Information)
Requirements according to ANNEX VII of DIRECTIVE 2012/19/EU
on waste electrical and electronic equipment (WEEE)
Materials and components with hazardous content
LCDs may contain hazardous substances like Pb and BFRs which are covered by
exemptions under the RoHS directive. However, the majority is present in the printed
circuit boards assembly. In order to reduce emissions as much as possible, a complete
disposal of the old appliance is required. This treatment may only be performed in
authorized handling plants.
Product Name:
LCD Monitor
Model No.: SW271C

Summary

Recycle Disassemble Instruction

WEEE and Hazardous Content

Information on WEEE requirements and hazardous materials like Pb and BFRs in LCDs.

Disassembly Tools

Disassembly Process

Monitor Head and Initial Components

Steps for disassembling the monitor head, stand, and initial internal parts (1.1-1.4).

Internal Component and PCB Removal

Steps for removing RC, FC, SHD, PNL components, tapes, and PCBs (1.5-1.12).

Stand Disassembly

Column and Slider Mechanisms

Steps for disassembling the stand column, hinge, slider, and spring (a-f).

Rail, Swivel, and Cover Removal

Steps for removing stand rail, swivel, and ring cover (g-i).

Base Disassembly

Hood Disassembly

Hood Sides and Extenders

Steps for removing cloth and sponges from hood sides and extenders (1-4).

Hood Top and Bridge Sections

Steps for removing cloth and sponges from hood top and bridge sections (5-8).

Disassembly Time

BenQ SW271C Specifications