10 How to assemble your monitor hardware
How to detach the stand base
1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging
the power cable. Turn off the computer before unplugging
the monitor signal cable.
Protect the monitor and screen by clearing a flat open area
on your desk and placing a soft item like a towel on the
desk for padding, before laying the screen face down on a
flat clean padded surface.
Please be careful to prevent damage to the monitor.
Placing the screen surface on an object like a stapler or a
mouse will crack the glass or damage the LCD substrate
voiding your warranty. Sliding or scraping the monitor
around on your desk will scratch or damage the monitor
surround and controls.
2. (For V2210 / V2210 Eco) Press the locking clips to
detach the monitor base from the monitor stand
arm.
(For V2410 / V2410 Eco) Release the thumbscrew
on the bottom of the monitor base and detach the
monitor base as illustrated.
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
Need help?
General
