7 How to assemble your monitor hardware
(For V2410 / V2410 Eco)
Orient and align the stand base socket with the end of the
stand arm, then push them together. Tighten the
thumbscrew on the bottom of the monitor base as
illustrated.
Gently attempt to pull them back apart to check that they
have properly engaged.
Carefully lift the monitor, turn it over and place it upright
on its stand on a flat even surface.
You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
-5
O
~ +20
O
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
Need help?
General
