BENRO Theta - Page 13

Fixed Mode
11
11
24
1. Tighten the clockwise, align
the ball head lower cover with any
of the three screw holes on the
bowl with a click sound.
2211
24
20
22
2. Tighten the clockwise, the
ball head will be xed.
20
22
Ball Head Different Movement Modes
Switching
11
Free Mode
9
22
1111
24
24
20
22
1. Loosen the and the
counterclockwise separately to
switch to free mode. The ball head
can be rotated in 360 degrees.
22
22
20
11
24
2. After rotating the ball head to
the required angle, tighten the
clockwise to x it to the current
shooting angle.
20
22
Before switching the ball head
movement modes, make sure the
decives mounted on the ball head
are locked rmly to prevent any
accidental damages.
Must lock rmly
Notes:
3. The ball head can only move in
Pan direction.
4. When the ball head is not
required for a panning movement,
please trigger the back to the
initial position.
9
11
23
23
Pan Movement
1. Tighten the clockwise. 2. Trigger the to the maximum
angle.
9
22
9
22
9
9
22
11
23
11
11
23
T i l t Movement
1. Loosen the 
under the xed mode.
counterclockwise
9
22
2. The ball head can only move in
the Tilt direction.
9
22
3. The ball head can move in Pan &
Tilt direction.
Pan & T i l t Movement
1. Loosen the counterclosewise
under the xed mode.
2. Trigger the to the maximum
angle.
9
22
9
9
22
11
23
*If would like to perform pan & tilt movement, please adjust the ball
head to the xed mode, then do the following oeprations.
9
9
22
11
23
9
22
12