Please refer to the detailed manual and tutorials on Benro Ofcial
(www.benro.com).
Smart Modules Instruction
1. After the tripod has been exposed to wet, sandy or dusty conditions
please rinse with fresh water, a mild soap solution or dry with a soft
towel to clean
2. Do not leave the tripod in the sun for prolonged periods and avoid
high temperature exposure
3. Do not use the tripod at temperatures less than -30°C or more than
60°C
4. Please inspect the tripod regularly to detect possible wear and tear,
malfunctions or damage early.
Maintenance
Cautions
1. Remove the camera equipment from the tripod during
transportation.
4. Smart Modules and Modular slots on the tripod cannot be
immersed in water.
5. Please keep the ngers away in time while deploying/folding or
mounting other devices to avoid pinching.
6. Do not scrub the bubble level, the precision could be lost
temporarily.
7. Damage caused by forced use in the case of aging or damage to
components.
8. Keep children away from the tripod parts to avoid swallowing.
2. Do not exceed the weight load capacity that the tripod is rated
for, excessive weight may cause damage to the tripod or
equipment.
3. Please follow the instructions strictly.
13
To Next Page
Loading...
