Theta/Theta Max Operation Instruction
1. Before using, deploy the tripod
to an appropriate angle & height
to make sure it can be placed
stably on a at surface ground.
2. Then mount the camera and
other devices to the ball head.
3. Be sure the devices are securely
locked to avoid accidental falls.
*Due to the differences in construction and design between Theta /
Theta Max and conventional tripods, it's recommended to read the
detailed instructions below carefully before the tripod use and follow
the directions shown in pictures.
QuickSetup01
Theta/Theta
Max X1
Dual-use
Ball Head X1
Deployable
Central Column X1
Protective
Soft Case X1
Quick Release
Plate X1
Hex Keys
Theta & Theta Ma
多功能智能脚架
使用说明书
www
.
b
enro.co
©202
3
百诺影像
版权所有
V1.1
线图
Quick
G
uide
P
acka
g
e contents
Theta/Theta Max
F
oot Spikes
X
3
X
3
X1
4
To Next Page
Loading...
