BENRO Theta - Page 6

1. Deploy the leg while it's in
storage, twist the clockwise
to unlock, and pull the leg out
while twisting the locking ring.
2. Then twist the
counterclockwise to lock the leg.
Deploy the Tripod
15
Keep twisting
while pulling
15
15
15
Leg Section Deployment and Retraction02
1. Adjust the height of each
section, twist the clockwise to
unlock, and pull/retract it to the
desired height while twisting.
2. Twist the locking ring
counterclockwise to lock.
Adjust the Height
15
Keep twisting
while pulling
15
Approach 1
15
1. Hold the section needs to be
adjusted, rotate it clockwise to
unlock and deploy or retract it to
the desired height while rotating.
2. Twist this section counterclowise
to lock it.
Keep twisting
while pulling
Approach 2
*Pleasebecarefulwhileoperatingandkeepthehandawayintimeto
preventpinching.
*Make sure the tripod is placed propely and follow the directions
shown in pictures to operate.
* W hile retracting / deploying or locking the legs , make sure to fully
twist the locking ring to lock or unlock position.
5
1. Twist the clockwise to unlock
legs. And pull legs up to retract /
fold while twisting the locking
R etr ac t the Tripod
2. Simply twist the
counterclockwise to lock.
15
Keep twisting while pulling
15
15
15
*While retracting or deploying the legs, make sure to fully twist the
locking ring to lock or unlock position.