BENSHAW BIPC-300200-01

Need help?

Do you have a question about the BENSHAW BIPC-300200-01 and is the answer not in the manual?

Summary

3-Wire Control Board

Control Option for EMX4 e;EMX4 i Soft Starters

Details the specific control option for EMX4e/EMX4i soft starters.

Installation Guide

Provides the primary instructions for installing the 3-wire control board.

Disclaimer and Warnings

Disclaimer

States that examples are illustrative and information is subject to change without notice.

General Warnings

Crucial safety advice: Isolate soft starter from mains and control voltage before work.

Product Overview

Description and Options

Explains the board's function and available control voltage options.

Design Schematic

Presents the electrical schematic for the 3-wire control board.

Setup Procedure

Setup Safety Warnings

Mandates isolating the soft starter from mains and control voltage before setup.

Setup Steps

Step-by-step guide for mounting, connecting, and configuring the control board.

Installation

Physical Installation

Instructions for mounting the board on a soft starter panel or DIN rail.

Wiring Connections

Diagrams and tables detailing connections between external controls, the board, and the soft starter.

Restart Prevention and Reset Procedures

Preventing Immediate Restart

Addresses motor restart issues after a trip and reset event.

Reset via Digital Input

Instructions for connecting reset pushbuttons to soft starter digital input.

Reset via External Pushbutton

Details on connecting external reset and stop pushbuttons for control.

Specifications

Connections and Certification

Details terminal types, cable size, and product certifications (CE, RoHS, UL).