EasyManua.ls Logo

Bensons for Beds PENELOPE STK770603 - User Manual

Bensons for Beds PENELOPE STK770603
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Page<1/8>
Regrettably self-assembly items cannot be returned once assembly is part or fully completed
unless the items are found to be faulty. Should you need to return the unassembled product,
please repack in its original packaging.
Important information
— We suggest you spend a short time reading through this leaflet and then follow the simple
step-by-step instructions.
— Carefully check that you have all the parts before beginning assembly.
— Keep fittings out of children's reach and keep children well away from construction area.
— We suggest you retain these instructions for future reference.
— In the unusual event of an issue with your product would you please quote the batch I.D.
number situated on the main parts of the frame (Head End- Foot End- side Rails).
Product information
— Upholstered Bed Using Fabric Material. Conforms to BS EN1725 & BS 5852
Care instructions
— Avoid exposing the furniture to excessive heat or direct sunlight as this can cause cracking and
deterioration of the color.
— Periodically check & re-tighten any fastener.
— Periodically dust lightly with a clean soft cloth.
— Do not use silicone based furniture polish.
— Any spills should be removed immediately with a damp cloth.
— TAKE CARE WHEN MOVING THE FURNITURE AND NEVER DRAG THE PIECES ACROSS
THE FLOOR, AS THIS WILL CAUSE DAMAGE TO THE JOINTS
PENELOPE Side Opening Ottoman Bedframe Upholstered 135cm&150cm&180cm
STK770603/STK770609/STK770616
STK770605/STK770611/STK770613
STK770601/STK770608/ STK770615
Right Open Version
Left Open Version
Minimum Two
Persons Assembly
Approximate
Assembly Time
60 MIN
Assembly Instructions
Please keep these instructions for future reference.
Question and Answer IconNeed help?

Do you have a question about the Bensons for Beds PENELOPE STK770603 and is the answer not in the manual?

Summary

Important Information

General Assembly Guidance

Read leaflet, check parts, keep fittings away from children, retain instructions.

Product Identification

Quote batch I.D. number from main frame parts for issues.

Product Information

Material Specification

Upholstered bed using fabric material, conforms to BS EN1725 & BS 5852.

Care Instructions

Environmental Precautions

Avoid heat/sunlight, check/re-tighten fasteners, dust lightly.

Cleaning & Moving

Use damp cloth for spills, do not use silicone polish, do not drag furniture.

Parts Identification

Carton A Components

Lists Head Board, Foot Board, Feet.

Carton B Components

Lists Side Rail, Shelf Rails, Support Rail.

Carton C Components

Lists Lifting Arms, Support Legs.

Carton D Components

Lists Bed Base, Shelves.

Hardware List

Details all bolts, nuts, washers, and tools required for assembly.

Assembly Step 2

Attach Side Rails to Frame

Connect side rails (3) to the bed frame using bolts (T). Do not fully tighten.

Assembly Step 3

Install Support Rails

Attach support rails (4, 5) to the frame using bolts (I, N) and nuts (C).

Assembly Step 4

Attach Support Legs

Fix support legs (11) to the frame using bolts (E, K).

Assembly Step 5

Connect Bed Base to Frame

Attach bed base (8) to the frame using bolts (H, D, N).

Assembly Step 6

Attach Lifting Arms

Connect lifting arms (7L, 7R) to the bed base and frame using locknuts (F).

Assembly Step 7

Prepare for Right Open Version

Connect support rails (10) to the frame for right-side opening.

Assembly Step 8

Connect Lifting Mechanism

Attach lifting mechanism components (7R) with hardware (Q, P, R, E, K).

Assembly Step 9

Secure Bed Base Slats

Fasten bed base slats to the frame using bolts (A) and tool (K).

Assembly Step 10

Prepare for Left Open Version

Connect support rails (10) to the frame for left-side opening using bolts (J).

Assembly Step 11

Finalize Lifting Mechanism

Connect lifting arms (7L) and mechanism parts using hardware (E, D, Q, P, R, E, K).

Assembly Step 12

Secure Bed Base Slats (Final)

Secure remaining bed base slats using bolts (A) and tool (K).

Assembly Step 13

Position Bed Base Supports

Place bed base supports (9) onto the frame.

Assembly Step 14

Close Bed Frame

Close bed frame using two hands equally spaced on the mattress base.

Important Safety Notice

Lifting and Closing Warnings

Do not allow children/pets inside, lift only with mattress, close with two hands.

Bensons for Beds PENELOPE STK770603 Specifications

General IconGeneral
BrandBensons for Beds
ModelPENELOPE STK770603
CategoryIndoor Furnishing
LanguageEnglish

Related product manuals