Need help?Do you have a question about the Bentel Security Absoluta 630 4.10 and is the answer not in the manual?
General| Brand | Bentel Security |
|---|---|
| Model | Absoluta 630 4.10 |
| Category | Control Panel |
| Language | English |
Procedures for system arming, disarming, and accessing the main interface.
Using Home Key, Outputs/Actions, and SD card slot.
Adjusting settings and navigating the user menu for system control.
Using digital keys for arming, disarming, and automation control.
How to activate Fire, Panic, or Emergency signals.
Steps to access the main interface using PIN entry.
Interpreting signals, SMS, events, status bar, and service indicators.
Using arming keys, auto-arming indicator, and menu bar access.
Explains arming modes, status indicators, and using arming/disarming keys.
How to disarm the system using a PIN and the keypad.
Using Duress PIN, Patrol PIN, and multi-PIN/Key disarming methods.
How to enable/disable auto-arming and postpone it.
How to resolve or bypass conditions preventing arming.
How the keypad indicates alarms and how to disarm partitions.
Procedure to cancel pending event transmissions.
Understanding LED indications for alarms, tamper, fault, and bypass.
How to view and clear alarms, tampers, faults, and bypassed zones.
Lists available functions like PIN, Settings, System, Keypad, and Info.
How user types affect access to menu options.
Steps to enter and navigate through Action, Program, and View sections.
Procedures to stop or restore visual/audio alarm signals.
How to test the system's alarm signaling devices.
Enabling installer access and communication modules (GSM, IP).
Configuring automatic arming and super user access.
How to arm or disarm partitions using PIN and keys.
Using Duress PIN, Patrol PIN, and multi-PIN/Key disarming methods.
How to clear alarms and reset zone/partition alarm memories.
How to arm or disarm specific partitions using their identification number.
How to set, enable, disable, and change user PINs.
How to disarm partitions using keys, including multi-PIN/Key methods.
How to arm the system in Away or Mode A using keys.
Using buttons for Away Arming, Stay Arming, and Disarming.
How to control the system remotely via phone using dialler or answer modes.
How to arm or disarm the entire panel or individual partitions.
Activating system events by calling or sending SMS to the control panel.
Sending SMS commands to arm or disarm partitions, handling blocking conditions.
To Next Page