Need help?Do you have a question about the Bentel Security KYO 320 and is the answer not in the manual?
General| Type | Control Panel |
|---|---|
| Model | KYO 320 |
| Manufacturer | Bentel Security |
| Partitions | 4 |
| Operating Temperature | -10°C to +55°C |
| Communication | PSTN, GSM |
Executes fundamental system operations using keypad codes and commands.
Arms all common partitions of the user code and keypad.
Disarms all common partitions of the user code and keypad.
Arms partitions using pre-configured A, B, C, or D modes.
Navigates the user menu to access enabled commands and functions.
Restores alarm signalling devices and clears zone/partition alarm memories.
Stops and freezes all alarm signalling devices on the system.
Arms or disarms partitions one by one using the user menu.
Views and prints events recorded in the control panel's event log.
Manages user access levels, enables/disables slave codes, and changes PINs.
Performs system operations like arming and disarming using digital keys and cards.
Disarms all system partitions by using a digital key or card.
Arms all system partitions in global mode using a digital key or card.
Arms system partitions in A mode using a digital key or card.
Arms system partitions in B mode using a digital key or card.
Controls system functions remotely using wireless keys.
Accesses system remotely via dialler mode using telephone keypad commands.
Accesses system remotely via answering device mode using telephone keypad commands.
Enters user code PIN via telephone keypad for system access.
Inputs command codes via telephone keypad after PIN authentication.
Engages in remote audio communication with premises via telephone.
Checks zone status and arms/disarms partitions via telephone.
Arms or disarms system in various modes via telephone commands.
To Next Page
