Need help?Do you have a question about the Bentel Security BGSM-I and is the answer not in the manual?
General| Brand | Bentel Security |
|---|---|
| Model | BGSM-I |
| Category | Cell Phone |
| Language | English |
Lists key features and capabilities of the BGSM-I GSM Interface.
Details physical and electrical specifications like power supply, temperature, and dimensions.
Provides a general overview of the BGSM-I's function in security applications.
Explains how part numbers in the manual refer to figures and components.
Details the terminal connections for power, telephone lines, inputs, outputs, and tamper switches.
Describes how the BGSM-I simulates a land line and handles SMS and ContactID communications.
Explains the BGSM-I's backup functionality for telephone lines during outages.
Details how the BGSM-I sends text messages for various events to programmed numbers.
Explains how the BGSM-I sends alarm and status signals to a central monitoring station.
Explains how land line engagement interrupts other communications.
Details how SMS or ContactID communications can interrupt ongoing calls.
Specifies how simultaneous events are handled for ContactID reporting.
Explains how outputs are triggered automatically by system events.
Describes how to control outputs via SMS or phone calls.
Details how bistable outputs can be turned on/off via SMS or phone calls.
Explains how monostable outputs activate for a set duration or until deactivated.
Outlines the process for programming the BGSM-I using PC software and a Null-Modem cable.
Describes how to load and view current BGSM-I settings via the software.
Explains how to upload configured settings from the PC to the BGSM-I.
Details initial steps within the software, like managing customer data.
Covers phonebook, prefix, and digit removal settings for telephone numbers.
Covers main window, polarity, phone numbers, SMS text, and special functions.
Allows setting the BGSM-I's operating priority between Interface and SMS Dialler/Contact ID.
Configuration for receiving pre-paid balance notifications via SMS.
Settings for scheduling periodic SMS messages.
Details polarity, event activation, and output labels for the programmable outputs.
Setting a code for phone-based output control.
Configuration of Contact ID reporting, including numbers and event codes.
Scheduling periodic Contact ID reports.
Viewing dialled, received, and missed call logs and managing the call queue.
Displays GSM data, inputs, outputs, and events status.
Shows scheduled times for next periodic SMS and Contact ID reports.
Option to interrupt ongoing calls and clear the outgoing queue.
Guides on reconfiguring the BGSM-I remotely via SMS.
General advice for successful manual programming via cellphone.
How to program up to 99 numbers for various functions using a cellphone.
Details the four SMS messages needed to configure the BGSM-I from a cellphone.
Specifies the SMS format for configuring output settings and events.
Details the SMS format for configuring the SMS Dialler functionality.
Specifies the SMS format for various other BGSM-I settings like inputs and priority.
Details the SMS format for configuring the Contact ID Communicator.
Lists the 15 SMS messages required for SMS Dialler configuration.
Explains how to enable remote programming via a specific SMS.
Points to further information sections within the manual.
Instructions on how to change the access code for remote operations.
Notes the capability of making calls on the GSM network.
Directs users to other relevant sections for more details.
To Next Page
