Need help?Do you have a question about the Bentel Security BGSM-G and is the answer not in the manual?
General| Brand | Bentel Security |
|---|---|
| Model | BGSM-G |
| Category | Cell Phone |
| Language | English |
Lists the key functionalities and capabilities of the BGSM-G device.
Details the electrical and physical specifications of the BGSM-G device.
Describes the function and fault indications of the RED status LED.
Describes the function of the YELLOW status LED for GSM network switching and calls.
Explains the function of the top and bottom GREEN LEDs for GSM reception and network status.
Explains how the device simulates a land line for backup communication.
Describes how the device sends SMS messages for various events.
Explains how the device sends Contact ID reports to a central station.
Configures the operational priority for simulated land line, SMS, and Contact ID.
Details automatic, remote-controlled, and bistable output activation methods.
Instructions on how to view the device settings using the software.
Procedure for downloading configuration data into the device.
Steps to take before starting device configuration and customer setup.
Details on entering and configuring telephone numbers in the phonebook.
Explanation of the SMS Dialer main window layout and event triggering.
Setup for receiving SMS messages about pre-paid SIM card credit balance.
Defines polarity, events, labels, and feedback for output control.
Configuration of up to four telephone numbers for Contact ID calls.
Mapping of device events to Contact ID codes and descriptions.
Assigns default Contact ID event codes for Sur-Gard System III/II receivers.
Entry of the GPRS service provider's Access Point Name for connectivity.
Configuration of primary and backup receiver IP addresses and ports.
Displays GSM network provider, battery charge, and signal reception.
Shows the status of the 4 inputs and associated special functions.
Displays the status of the 4 outputs and allows real-time activation/deactivation.
To Next Page
