To Next PageTo Next Page
Need help?Do you have a question about the Benthin IQ2-Motor RTS and is the answer not in the manual?
Guides initial programming of an RTS radio transmitter to the drive electronics.
Explains how to program an additional RTS radio transmitter to an already programmed drive.
Details the process of removing a programmed RTS radio transmitter from the drive.
Describes how to disable the learning capability of the RTS radio transmitter.
Instructs on setting a custom "my" position for the motor using the UP/DOWN buttons.
Explains the procedure to remove a previously saved "my" position.
Outlines how to reset all programmed settings on the IQ2-Motor by deleting all configurations.
Basic installation steps for the IQ2-Motor using a control switch with strip terminal.
Installation of the IQ2-Motor system using an RTS wireless hand transmitter.
Warning regarding installation work in the 230 V range by authorised specialists.
Details system control via switch/remote and notes the motor system is maintenance-free.
The IQ2-Motor is a sophisticated solution for vertical blinds, offering enhanced intelligence and a range of features beyond basic operation. It integrates both wired control switch and RTS (Radio Technology Somfy) wireless control options, providing flexibility in how the blinds are operated.
The primary function of the IQ2-Motor is to automate the movement and rotation of vertical blinds. It supports the well-known functions of sideways blind travel (opening and closing) and 180° louvre rotation. In addition to these standard operations, the IQ2-Motor is equipped with a "decorative setting" and an "intermediate stop function," allowing for more nuanced control over the blind's position.
A key safety feature is its "overload detection," which ensures maximum safety during operation. The version with an integrated RTS receiver optimizes compatibility with Somfy systems, allowing for seamless integration into existing smart home environments.
The IQ2-Motor RTS system involves a series of programming steps using a handheld radio transmitter.
Initial Programming: To program an RTS radio transmitter, the PROG button on the drive electronics must be pressed for approximately 2 seconds. This initiates a "Biiip BipBip" sound, indicating that the system is ready to learn. Subsequent presses of the PROG button on the handheld transmitter (for approximately 0.5 seconds) will program up to 12 handheld radio transmitters. The system provides auditory feedback ("Biiip BipBiiip") and visual cues (quick opening and closing) to confirm successful programming.
Programming Another RTS Radio Transmitter: If a radio transmitter is already programmed to the drive, new transmitters can be added. Using the already programmed transmitter, press its PROG button for approximately 2 seconds ("Biiip BipBip"). Then, use the new transmitter and press its PROG button for approximately 0.5 seconds ("Biiip BipBiiip").
Deprogramming an RTS Radio Transmitter: To remove a transmitter, use an already programmed transmitter. Press its PROG button for approximately 2 seconds ("Biiip BipBip"). Then, press the PROG button on the transmitter to be deprogrammed for approximately 0.5 seconds ("Biiip Biiip Bip").
Cancel Learning Ability: To prevent further transmitters from being programmed, press the PROG button on a programmed transmitter for approximately 0.5 seconds ("Biiip Biiip Biiip"). This action is confirmed by the blinds opening and closing quickly.
Programming "My" Position: The IQ2-Motor allows users to set a preferred "my" position. First, move the blinds to the desired "my" position using the UP or DOWN buttons. Then, press the "my" button on the transmitter for approximately 5 seconds until a "Biiip Bip Biiip" sound is heard.
Deleting a "My" Position: To remove a previously set "my" position, move the blinds to the "my" position. Then, press the "my" button for approximately 5 seconds, followed by pressing the "my" button again for approximately 0.5 seconds. This sequence results in a "Biiip Biiip Bip" sound.
Deleting All Settings: To clear all programmed settings, press the PROG button on the drive electronics for approximately 12 seconds until the last "bip" has faded. This action is confirmed by a sequence of "Biiip Bip Bip Biiip Biiip Bip" followed by "Biiip Biiip Bip."
Installation of the IQ2-Motor system requires careful attention to electrical connections. It is crucial that all installation work in the 230 V range is carried out by authorized specialists. Voltage should not be applied until all installation work has been completed. The motor must not be removed from the track.
The vertical blinds system can be controlled by a control switch and/or a remote control.
The motor system is described as "maintenance-free," indicating that it requires no regular upkeep or servicing.
In summary, the IQ2-Motor is a robust and intelligent solution for automating vertical blinds, offering advanced control, safety features, and ease of integration with Somfy RTS systems, all while being a maintenance-free unit.
General| Brand | Benthin |
|---|---|
| Model | IQ2-Motor RTS |
| Category | Window Blinds |
| Language | English |
