Need help?Do you have a question about the Bently Nevada Ranger Pro ISA100 and is the answer not in the manual?
General| Communication Protocol | ISA100 Wireless |
|---|---|
| Wireless Standard | ISA100.11a |
| Enclosure Rating | IP66 |
| Category | Gateway |
| Power Supply | 24 VDC |
| Mounting | DIN rail |
| Hazardous Area Approvals | ATEX, IECEx |
| Model | Ranger Pro ISA100 Gateway |
Inspect device for shipping damage and file claims if necessary.
Handle components carefully and follow prescribed maintenance and disposal procedures.
Adhere to labels and markings for safe installation and environmental compliance.
Details the Ranger Pro Gateway's features, function, and intended use.
States FCC and Industry Canada compliance and lists approved antenna types.
Specifies PC, browser, and firewall port requirements for gateway configuration.
Provides an overview of the steps to add and deploy Ranger Pro Gateways.
Details how to mount the gateway onto vertical or horizontal poles.
Introduction to the web-based user interface for configuration and monitoring.
Procedure for accessing the gateway's functions via login.
Displays plots of selected channels for field devices.
Shows join states and times for highlighted units.
Displays process value data in a historical table format.
Displays signal strength for connected devices.
Recommends changing the default web interface password for security.
Recommends changing the default IP address to prevent network conflicts.
Recommends changing the device network ID to prevent wireless conflicts.
Checks if field devices have successfully joined the network.
Troubleshooting steps for devices failing to join the network.
Guidance on adding routing devices or repeaters for weak RF coverage.
Information on replacing the coin-sized battery for real-time clock backup.
Instructions for cleaning and inspecting the gateway exterior and interior.
Interface for selecting devices and initiating firmware upgrades.
To Next Page