Need help?Do you have a question about the Benzlers J Series and is the answer not in the manual?
Worm Gear units and geared motors in single & double reduction types.
Screwjack worm gear unit.
Worm gear unit.
Right angle drive helical worm geared motors & reducers.
Parallel angle helical bevel helical geared motors & reducers.
Helical parallel shaft & bevel helical right angle drive gear units.
Large helical parallel shaft & bevel helical right angle drive units.
Shaft mounted helical speed reducers.
Right angle helical bevel helical geared motors & reducers.
In-line helical geared motors & reducers.
Lubrication and fluid transportation pump.
Various couplings and overload protection devices.
Details KIBO standard hollow shaft bore dimensions.
Provides dimensions and types of shaft bushings available.
Instructions for mounting, dismounting, and tightening torque for KIBO bushes.
Details for standard motor mounts, including dimensions and mounting positions.
Specifications for heavy duty motor mounts, including dimensions and IEC c/c measurements.
Technical specifications for fan and oil cooler units, including dimensions and performance data.
Provides dimensions for torque arm options (RL).
Provides dimensions for shock absorber options (RR).
Provides dimensions for overload release options (RO).
Details on shrink disc sizes, torque, and protection cover dimensions.
Information on the availability and benefits of belt protection for gears.
Information on Series J hydraulic drives and compatible hydraulic motor alternatives.
Details on vertical mounting options for Series J speed reducers.
Instructions for mounting and dismounting Series J backstops.
Overview of potential hazards associated with power transmission equipment operation.
Guidance on correctly mounting Series J speed reducers on shafts.
Details on recommended lubricants, oil quantities, and oil level plugs for Series J.
General| Series | J Series |
|---|---|
| Mounting | Foot-mounted, flange-mounted, shaft-mounted |
| Output Options | Solid Shaft, Hollow Shaft |
| Efficiency | Up to 96% |
| Housing Material | Cast Iron |
| Lubrication | Oil bath, grease |
| Ratio Range | 5:1 to 100:1 |
| Operating Temperature | -20°C to +80°C |
To Next Page
