Set compression to
minimum (turn anti-
clockwise)
Turn in direction of
icon "rabbit"
Turn in direction of
icon "turtle"
Wearing your riding
gear, stand on the ped-
als and rock backwards
and forwards while a
2nd person holds the
bike steady.
Shift the measuring
ring to lowest position
Make a test ride Make a test ride
Carefully step off the
bike
Check if sag is within
recommended range
If the sag is out of the recommended
range, adjust the pressure in the fork.
See page 16.
Up to 18 different rebound speeds (18
clicks of the knob) are available,
depending on the fork type.
Rebound that is too rapid makes the
bike ‘kick back’ while rebound that is
too slow reduces fork travel over
successive bumps, as the fork doesn't
return in time to the full extension.
Measuring sag
Increasing rebound speed Decreasing rebound speed
Test several rebound speeds on a
familiar section of a bumpy trail and
choose the setting you like most.
Suspension
fork
Brake
levers
ü
Saddle
height
Saddle
position
ü ü
Handlebar
height
ü
To Next Page
Loading...