Cleaning the bicycle
Regular cleaning after every ride will prolong the lifetime of your bike.
Use a hose or a bucket of water•
Use a sponge or a soft brush•
Cleaning is also a good opportunity to
closely check for damage or scratches.
Salt from winter roads, dirt or mud
damage the materials and impair the
functionality of brakes and other
parts.
Don't get oil or chemicals on the brake
pads or rim sides. The brakes could
fail.
Don't use a high-pressure washer or a
steam jet as they could damage the
bike.
Clean and grease the chain especially
after rides on wet roads and in rain.
The chain is the part that needs the
most frequent care. A worn chain can
reduce the lifetime of chainrings and
sprockets.
Grease a cloth and rub the chain with
it. This is preferable to using sprays,
which could result in grease getting on
the frame, the rotor, rim or tyre.
Clean all parts Cover the frame with
protective wax
Grease the chainLet dry
To Next Page
Loading...