Need help?Do you have a question about the BeoPlay H8i and is the answer not in the manual?
General| Type | On-ear |
|---|---|
| Wireless | Yes |
| Noise Cancellation | Active Noise Cancellation (ANC) |
| Bluetooth | Bluetooth 4.2 |
| Weight | 215 g |
| Microphone | Yes |
| Battery | Rechargeable Lithium-Ion |
| Battery Capacity | 1110 mAh |
| Charging Time | 2.5 hours |
| Codecs | AAC, SBC |
| Transparency Mode | Yes |
| Touch Controls | Yes |
| Battery Life | Up to 30 hours |
| Frequency Range | 20 Hz - 22 kHz |
| Driver | 40 mm |
| Play Time | Up to 30 hours with Bluetooth and ANC |
| Materials | Aluminum, Leather, Polymer |
| Voice Assistant | Yes |
| Colors | Black, Natural |
Use the app for setup, product customization, and music enhancement features.
Short press to turn on; press center for 2s to turn off. Auto-off after 15 mins.
Press and hold middle button on right headphone for 5s until blue light flashes.
Control music playback, track skipping, and volume using the center button and Vol+/-.
Disable/enable automatic play/pause by holding the center button for 5s.
Accept, reject, terminate calls, and transfer audio during calls.
Move the button down to turn ANC off. Move down again to turn ANC on.
Move button up to turn Transparency on (orange light), up again to turn off.
Red light indicates <10% battery. Green light indicates fully charged.
Connect the mini-jack cable for use if Bluetooth is unavailable or battery is depleted.
Register online for product/software updates and news from BANG & OLUFSEN.
To Next Page
