Need help?Do you have a question about the BeoPlay H9i and is the answer not in the manual?
General| Noise Cancelling | Active Noise Cancellation (ANC) |
|---|---|
| Charging Time | Approximately 2.5 hours |
| Weight | 285 grams |
| Microphone | Yes |
| Driver Size | 40 mm |
| Frequency Range | 20 Hz - 22 kHz |
| Touch Interface | Yes |
| Voice Assistant Support | Yes |
| Type | Over-Ear |
| Connectivity | Bluetooth 4.2, 3.5mm jack |
| Battery Life | Up to 18 hours |
| Impedance | 24 ohms |
| Colors | Black, Natural |
Download the Beoplay app from the App Store or Google Play for setup and control.
Power on the Beoplay H9i headphones by moving the switch to the ON position.
Connect the headphones to your device via Bluetooth by selecting 'Beoplay H9i'.
Place the Beoplay H9i headphones on your head to begin using them.
Control music playback by tapping the touch interface on the right earcup.
Increase or decrease volume by swiping up or down on the touch interface.
Skip to the next or previous track by swiping forward or backward.
Toggle Active Noise Cancellation (ANC) on or off using the touch interface.
Enable or disable Transparency mode to hear your surroundings via the touch interface.
Connect the headphones to a power source using the USB cable for charging.
Register online at beoplay.com/register for important product and software updates.
To Next Page