Need help?Do you have a question about the BEP Marine Matrix 600-DCM V3.2 and is the answer not in the manual?
General| DC Voltage Inputs | 6 |
|---|---|
| Tank Level Inputs | 4 |
| Digital Inputs | 4 |
| Mounting | Surface mount |
| Communication | NMEA 2000 |
| IP Rating | IP65 |
| Display | 3.5-inch color display |
| Dimensions | 150mm x 110mm x 45mm (5.9" x 4.3" x 1.8") |
| Description | The Matrix 600-DCM V3.2 is a DC monitoring system designed to provide comprehensive information about a vessel's DC electrical system. It monitors voltage, current, tank levels, temperature, and digital inputs, and provides relay outputs for control functions. The system features a user-friendly display and communication capabilities for remote monitoring and control. |
| Temperature Inputs | 4 |
Explains the exponent for calculating discharge rates based on battery capacity.
Enable or disable all alarms on the monitor.
Set the high voltage threshold for battery bank 1.
Set the low voltage threshold for battery bank 1.
Set the low amp hour threshold for the alarm.
Configure the Peukert's exponent for accurate capacity calculation.
Calibrate the voltage reading for battery bank 1.
Calibrate the amp meter readings for low and high ranges.
To Next Page