5
Precautions
Read the following instructions carefully, since they give you useful safety information about
installation, use and maintenance and help you avoid mishaps and possible accidents.
Remove the packing and make sure that the appliance is intact, with special attention to the supply
cable.
The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the
children, in order to preserve them from danger sources. It is recommended not to throw these packing
material in the domestic waste, but to deliver them to the appropriate station of collection or destruc-
tion refusals, asking eventually information to the manager of the Sanitation Department of your own
municipality.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualied persons in order to avoid a hazard.
Before connecting the appliance make sure that the mains voltage corresponds to the data specied
on the label.
The appliance can be damaged if the voltage is not correct.
If the plug does not suit the socket, let it be replaced with another suitable plug by qualied personnel
only, which shall also ensure that the section of the socket cables is suitable for your appliance power
absorption.
Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be
necessary, please use only simple or multiple adaptors and extensions in compliance with the safety
rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the
extensions and the maximum power limit marked on the multiple adaptor are not exceeded.
Do not use the appliance if the cable or the plug shows any damages.
Do not use the appliance after a possible irregular working. In this case, switch it off and do not break
it open. Refer to an authorized Beper after-sale service for repair and require original spare parts only.
Failing to follow these instructions may impair the safety of your appliance.
This appliance is to be destined to its special purpose only. Any other use is to be considered as im-
proper and thus dangerous. The manufacturer cannot be responsible for any damages deriving from
improper, wrong or incautious use.
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water
or other uids.
Do not use the appliance near explosives, highly ammable materials, gases or burning ames.
Do not allow children, disabled people or every people without experience or technical ability
to use the appliance if they are not properly watched over. Close supervision is necessary when
any appliance used by or near children.
Product Description Fig.A
1. Head mounting shaft
2. ON/OFF and speed setting button
3. Safety lock against accidental ignition
4. Power cord plug
5. Epilating head with protection
6. Shaver head with protection
Charging of the epilator
Note: Before rst use, make sure to fully charge the appliance
Note: The appliance is suitable for plug and play use
To charge the epilator, plug in the adaptor into the power cord plug at the bottom of the appliance and
connect it to the socket.
When the charge indicator ashes red: the epilator is charging; this can take up to 90 minutes.
To Next Page
Loading...