10
Ash Vacuum Cleaner Mangiacenere Use instructions
PRODUCT DESCRIPTION
1 - Metal Pipe
2 – Carry handle
3 - Connector for the suction pipe
4 - Power button 0 / I
5 - Engine
6 - Power cord with plug
7 - Closing hooks
8 - Tank (stem) steel
9 - Connector for the spear
10 - Aluminum spear
11 - Hepa lter
12 - Fixing plates for the lter
13 - Screw to x the lter
ASSEMBLING VACUUM CLEANER
Always remove the plug from the power socket before tting or removing accessories!
A) Take all the accessory out
B) Put the tube to the handle of hose
C) Fitting the exible hose
Insert exible hose into the air intake duct on the top of appliance. Press until it clicks into position.
INSTRUCTIONS FOR USE
1) Press the ON/OFF button to switch the appliance on. Fig 2
2)When nished cleaning ,switch off and removing the plug from the power socket. To release the
exible hose rmly from the air intake duct. Then to dump the dust from the collect tank . FIG 3
3) MAINTENANCE AFTER USE
Screw off the lter screw in the end and take the lter out for cleaning or charge
Follow FIG 4 process for taking off the lter
Follow FIG 4 process for assembling back and keeping the lter
Cleaning lter
Filter should be cleaned at least twice a month or when it becomes visible solid.
Always operate the cleaner with lter installed.
Otherwise, reduced suction or motor damage may be result.
Disconnect from electrical outlet, before cleaning lter.
Do not use a washing machine to rinse lter.
Do not use hair drier to dry it.
To Next Page
Loading...
