21
Slow juicer Use instructions
EN
Maintenance and Preservation
1. Before washing this product, be sure to turn off the switch and disconnect the power supply.
2. Please timely wash this product after operation.
3. The machine body cannot be washed using water. Instead, use dried duster cloth or cotton cloth
to wipe it.
4. Before storing this product, make sure that this product is clean and dried.
5. Before washing, detach this product as per the following procedures:
All parts (1,2,3,4) are detached according to the contrary
direction to installation.
The assembly of juice outlet and cover can be freely de-
tached or installed.
If there is pulp in pulp outlet, sealing gum can be removed
from the pulp outlet and washed using water and then in-
stalled for next operation.
To Next Page
Loading...
