To Next PageTo Next PageWhat to do if my Beretta IDRABAGNO Lx 17 Boiler does not switch on?
If your Beretta Boiler doesn't switch on, there could be a few reasons. First, ensure it's properly connected to the mains; if not, connect it. Second, check if the gas supply is on; if not, turn it on. Lastly, there might be air in the gas line, in which case you should bleed the circuit.
Why won't my Beretta IDRABAGNO Lx 17 Boiler burner come on?
If the burner on your Beretta Boiler doesn't come on, possible causes include a broken ignition/flame detection electrode (check and replace it), a cut-off electrode cable (check and replace it), a circuit board that isn't detecting the flame (check connector contacts and replace the board if necessary), or a main solenoid valve that isn't opening (check and replace it if necessary).
What to do if my Beretta Boiler has no spark but the fan is operating?
If your Beretta Boiler has no spark but the fan is operating, potential causes include a pressure switch fault (replace it), a disconnected or cut pressure switch tube (check, replace, or insert it), a broken ignition/flame detection electrode (replace it), a cut-off electrode cable (check and fix it), a circuit board that doesn't detect the flame (check and fix it), or a main solenoid valve that doesn't open (check and fix it).
General| Category | Boiler |
|---|---|
| Model | IDRABAGNO Lx 17 |
| Brand | Beretta |
| Electrical Supply | 230V/50Hz |
| Certification | CE |
| Mounting | Wall-mounted |
| Fuel Type | Natural Gas |
