EasyManua.ls Logo

BERGER B40-T - Product Information; Scope of Delivery; Technical Description; Operation Guidance

BERGER B40-T
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB
SCOPE OF DELIVERY
1 cooling unit
1 instruction manual
1 100 - 240 V AC mains plug
1 12/24 V DC mains plug
TECHNICAL DESCRIPTION
The unit is equipped with compressor cooling� The cooling is wear-free� In compressor mode, it
can cool down or keep goods cool or deep-freeze them down to -20° C� In compressor mode,
the temperature can be continuously adjusted from +20° C to -20° C via an LED display
OPERATION:
CAUTION! DANGER TO HEALTH!
Food may only be stored in original packaging or suitable containers�
NOTE!
For reasons of hygiene, you should clean the interior and exterior of the new cooling unit
with a damp cloth before putting it into operation (see also chapter „Cleaning and care“� The
cooling unit must be kept horizontal� It is recommended that the cooling unit is placed in a
horizontal position for 24 hours before being put into operation for the first time�
A few drops of water can settle inside the cooling unit if it has been cooling for a long time�
This is normal because the moisture in the air condenses to water droplets when the tempe-
rature inside the cooling unit cools down� The cooling unit is not defective� If necessary, wipe
it out with a dry cloth�
Tips for saving energy
Choose a well-ventilated location, protected from sunlight�
Allow hot food to cool before keeping it cool in the refrigerator
Tragegriffe
LED-Display
Lüftungsöffnungen
18

Related product manuals