Need help?Do you have a question about the BERGER BSS1184 and is the answer not in the manual?
Read all instructions and warnings before installation. Do not disassemble or attempt to repair.
Explains how the controller limits PV array power to protect itself and ensure optimal charging.
Read instructions before installation, handle batteries with care, ensure good ventilation.
Choosing a location with sufficient airflow and clearance for heat dissipation.
Steps for connecting the battery, load, and PV array in the correct order.
Describes protection against over current or power from the PV array.
Controller behavior during PV array short circuit.
Controller behavior and protection against reversed PV array polarity.
Prevents battery discharge through the PV module at night.
Protection against reversed battery polarity.
Controller stops charging when battery voltage exceeds over voltage disconnect.
Controller stops discharging when battery voltage drops below low voltage disconnect.
Controller stops operation when internal temperature exceeds 65°C.
Controller stops charging/discharging if battery temperature is below LTPT.
Controller cuts off output for load short circuit and auto-reconnect attempts.
Controller cuts off output for load overload and auto-reconnect attempts.
Controller stops working when internal temperature exceeds 85°C.
Troubleshooting steps for PV array disconnection or no LCD display.
General| Brand | BERGER |
|---|---|
| Model | BSS1184 |
| Category | Controller |
| Language | English |
To Next Page
