What to do if there is no AC output after pressing the AC switch on my BERGER Portable Generator?
If your BERGER Portable Generator has no AC output but the LCD display is normal, it could be due to several reasons: * **Over temperature:** Disconnect the load. * **Overload:** Check the power consumption of the connected device. Reduce the power or switch it off. * **Under voltage:** Try charging the unit.
Why is my BERGER Portable Generator not fully charged by solar charging?
If your BERGER Portable Generator unit isn't fully charged by solar charging, the issue might be: * The solar panel is not suitable. * The solar radiation is too low. To fix this, select a suitable solar module and ensure that the charging voltage is higher than 13V.
Why does the 12V or USB DC consume energy quickly on my BERGER Powerstation BPS1000?
If the 12V or USB DC on your BERGER Portable Generator is consuming energy quickly, it's likely because the AC switch is on, causing a high standby current. To resolve this, switch off the AC switch when using DC output.
How to fix USB without output on BERGER Powerstation BPS1000 Portable Generator?
If the USB on your BERGER Portable Generator has no output, the USB output/display switch might be off. Press the ON/OFF switch to turn it on.
What to do if there is no LCD display on my BERGER Powerstation BPS1000?
If there is no LCD display after pressing the ON/OFF button on your BERGER Portable Generator, the internal lithium battery is likely not charged. Try charging the unit.
General| Brand | BERGER |
|---|---|
| Model | Powerstation BPS1000 |
| Category | Portable Generator |
| Language | English |
To Next Page