Berges ACM-D2 7.5kW - User Manual

Operating manual
ACM

Summary

Safety Notes and Introduction

Explanation of Symbols and Notes

Explains symbols used for safety warnings and cautions in the manual.

General Safety Notes

Provides general safety guidelines and precautions for operating and installing the inverter.

Technical Data and Dimensions

Technical Data (1 x 220...240 V)

Detailed specifications for inverters with 1x220-240V input.

Technical Data (3 x 380...415 V)

Detailed specifications for inverters with 3x380-415V input.

Technical Data (3 x 380...460 V)

Detailed specifications for inverters with 3x380-460V input.

Installation Procedures

General Installation Requirements

Mains Power Connection

Instructions for connecting the inverter to the AC mains power supply.

Motor Connection

Instructions for connecting the motor cable to the inverter terminals.

EMC and Interference Suppression

Control Terminals Overview

Detailed explanation of the functions of each control terminal.

Power Terminals Overview

Explains the function of power terminals for mains and motor connections.

Commissioning and Operating Functions

Pre-Commissioning Checks

Error and Warning Messages

Hardware Error Messages

Lists hardware error messages, their causes, and remedies.

Programming ACM-D2 Parameters

Program Level TAB1: Frequency and Ramp Settings

Configures output frequency, ramps, and basic motor settings.

Program Level TAB1: Torque, Limits, and Slip

Program Level TAB2: Speed Reference Configuration

Program Level TAB2: Speed Reference Selection and Scaling

Selects and scales the speed reference signal type.

Program Level TAB3: Diagnostics and Outputs

Troubleshooting and Functions Summary

Faults and Remedies

Lists common faults, their causes, and remedies.

Berges ACM-D2 7.5kW Specifications

General

Rated Power	7.5 kW
Output Power	7.5 kW
Frequency Range	50/60 Hz
Efficiency	98%
Protection Level	IP20
Cooling Method	Air cooling