Need help?Do you have a question about the BERGHOF B-Fortis CC-Slim Series and is the answer not in the manual?
Defines hazard categories (DANGER, WARNING, CAUTION, NOTICE) and their meanings for safety messages.
Defines qualified personnel as trained staff authorized to assemble, install, and maintain devices according to safety engineering standards.
Describes the automation system's intended industrial use, specifying conditions for overvoltage category, pollution, altitude, and temperature.
Covers general safety instructions, including operating the device flawlessly and precautions when working on it.
Provides a diagram and list of connections for the B-Fortis CC-Slim, noting its installation on a mounting rail.
Details assembly, processor, Ethernet, USB, CAN, serial, analogue, and other interfaces of the B-Fortis CC-Slim.
Describes the intended installation of the B-Fortis CC-Slim on DIN mounting rails and safety precautions.
Details the external 24 V DC power supply requirements, including voltage, current, and buffering specifications.
Provides a block diagram of data connections and introduces digital inputs/outputs.
Explains how to switch the device on and off, noting it lacks a physical switch and starts automatically.
Guides the user through the initial network start-up, including IP address setup and web browser configuration.
Explains the function and meaning of operating status LEDs (PWR, Run/Stop, Error) on the device.
Provides guidance on common issues like network connection loss, error stop mode, and unknown IP addresses.
States that repairs and maintenance should be done by the manufacturer and advises on keeping ventilation clear.
Provides a step-by-step guide with illustrations on how to safely disassemble the device from the mounting rail.
Outlines components requiring separate disposal (metals, electronics, battery) and options for disposal by manufacturer or regional regulations.
Details CPU specifications and memory details (flash, RAM, retain memory) for B-Fortis CC-Slim.
Provides the physical dimensions (WxHxD) and approximate weight of the B-Fortis CC-Slim.
Specifies supply voltage, power consumption, reverse polarity protection, and power failure bridging.
Lists applicable directives (EMC, RoHS) and standards (EN 50581, EN 61131-2, EN 61000-6-3, DIN EN 61010) for the device.
Provides contact details for Berghof Automation GmbH customer services, including phone, fax, email, and website.
Mentions that the firmware contains free software under various open-source licenses.
General| Brand | BERGHOF |
|---|---|
| Model | B-Fortis CC-Slim Series |
| Category | Control Systems |
| Language | English |
To Next Page
