Page 10
Maintenance
Turntable
It is recommende to check the adjustments yearly. If necessary, finetune.
Check the amount of oil in the bearing yearly.
Clean carefully with a soft cloth wriged in mild soapy water.
Airsupply
Check the dust filter frequently, and clean or replace if necessary. A dirty filter can cause damage to
the pump!
Clean carefully with a soft cloth wriged out in mild soapy water.
Specifications
Turntable
Plinth:
Platter/Bearing:
Subplatter:
Dimensions:
Total weight:
Tonearm
Effectiv mass:
Motorcontrol:
Airsupply
Dimensions:
Weight:
Airbearing design.
Record flatten by a heavy clamp.
DC motor. Beltdriven.
High density composite material.
Aluminium platter/Polycarbonate mat, supported by air, and centred by
steel spindel/hardweared low friction polymer bearing.
Platter weight: 6,0kg.
Aluminium, weight: 1.4kg.
440 x 495 x 165 (D x W x H).
18,5kg.
Linear tracking airbearing tonearm. Aluminium/carbon.
Armtube damped inside.
Counter weight decoupled from armtube.
Wire: High quality copper litz.
Clips: Gold plated copper.
Connectors: CMC rca connectors. Gold plated super copper.
Neutrik XLR connectors. Gold plated.
Cardas DIN connectors. Gold plated.
11 gr.
Seperate plug-in power supply.
33 & 45 rpm. Speed finetuning.
Silent, clean, dry and smooth airflow. Replaceable dust filter.
300 x 190 x 175 (D x W x H).
5,4kg.
To Next Page
Loading...