berlinger Fridge-tag 2 E - User Guide Manual

In measurement mode, when no ALARM has been triggered, the
following information is indicated on the screen:
• The OK symbol
• The current date and time:16.09.2016 /13:47
• The current temperature: +5.6 °C
Indication of an OK display
2
6101 2096
056
1 473
°C
Int.
Sensor
!
• the ALARM symbol
• an additional warning symbol
• the corresponding arrow: upper/lower alarm
• the current date and time:16.09.2016 /15:42
• the current temperature: +8.8 °C
In measurement mode, when an ALARM has been triggered, the
following information is indicated on the screen:
Indication of an ALARM display
2
6101 2096
088
1 425
°C
Int.
Sensor
!
!
!
!
!
2
55
0 000
max.
°C
Int.
Sensor
• the OK symbol
• the corresponding arrow
(example: high limit records of the current day today)
• the highest recorded temperature of that day:
+5 .5 ° C
• the time duration out of the preset temperature
high limit: 00:00 (hrs: min)
The following information is indicated on the display:
Reading the history
Option 1:
Read out day-per-day directly on the
device (30 day history)
Example of an OK display
!
Press
READ
once
!
2
6101 2099
1 218
!
1st displayed screen
Press
READ
The following information is indicated on the display:
• the ALARM symbol
• the corresponding arrow
(example: Low limit records and the day of ALARM)
• the date of alarm:1 9.09.2016
• the time of alarm:18:21
Example of an ALARM display
!
!
Reading the display during measurement
2
-
011
0 351
min.
Int.
Sensor
!
Press READ
a second time
The following additional information is indicated on the display:
Note: Continue repetitively pressing the READ button to read
out the details of the past 30 days.
• Lowest recorded temperature of that day: -1. 1 ° C
• The time duration out of the preset temperature
low limit: 01:35 (hrs:min)
2nd displayed screen
!
In addition to the ALARM symbol
each newly triggered alarm is
indicated by the warning symbol.
!
Option 2: The warning and ALARM symbol (X)
will remain visible until the user reads the details of
the triggered alarm/s from the display. After that both
symbols will disappear and the display will go back to
the OK Symbol ( ).
The warning symbol
Option 1: The warning and ALARM symbol
(X) will remain visible until the user reads the
details of the triggered alarm/s from the display.
After that the warning symbol will disappear.
The ALARM symbol (X) cannot be changed.