Connecting the TV-A
to a power outlet
Start by connecting the TV-A to a power outlet.
Use the provided power supply
1. Plug the power cord into the “power” connector
on the TV-A (A).
2. Plug the power supply into the mains wall
socket (B).
3. Check that the power is turned on (C); after a
few seconds both indicators will fade blue to
indicate that pairing with your hearing aids is
needed. See page 24.
Important Notice
When charging the TV-A use the supplied
original power supply 5.0V/1A, CE and safety
marked.
12
To Next Page
Loading...