Berner 120318 - Environmental Protection

Attention!
- The torque transmission is dependent on the lever arm. The use of the tool outside the handle
area or the use of extension tubes or special additional tools has a negative effect on the torque
values. Always apply force on the centre of the handle, do not use extensions.
*N
.
m: Unit of measurement for force according to the International System (SI).
** 3/4“ through square with pin retention
Environmental protection
- The packaging and the torque wrench are made of recyclable materials and must be disposed
of appropriately.
Thumb wheel for
easier fastening
Ergonomic handle
Extensible for
anticlockwise tightening
Easy reading
with magnification
Micrometer
Setting
Locking button for
setting the values
Item Description Values N·m* Length mm Pieces/Package
120362 Torque wrench 1/4“ 2 - 25 285 1
120318 Torque wrench 3/8“ 5 - 50 335 1
120324 Torque wrench 1/2“ 10 - 100 394 1
120332 Torque wrench 1/2“ 20 - 200 485 1
120340 Torque wrench 1/2“ 60 - 300 577 1
120350 Torque wrench 3/4“** 75 - 400 686 1
120351 Torque wrench 3/4“** 140 - 750 1236 1
2680971_Bed_RAH_BERNER_1111.indd 6 28.11.11 13:41