To Next PageTo Next Page
Need help?Do you have a question about the Berner BAG 230-1 CLB and is the answer not in the manual?
General| Disc diameter | 230 mm |
|---|---|
| No-load speed | 6600 rpm |
| Spindle thread | M14 |
| Grinding wheel diameter | 230 mm |
| Weight | 5.7 kg |
| Power | 2400 W |
Read all safety warnings and instructions to prevent electric shock, fire, or injury.
Covers kickback, grinding, sanding, wire brushing, cutting, and general safety advice.
Describes the machine's intended purpose for cutting, roughing, and brushing.
Lists and describes the numbered parts of the machine shown in the illustration.
Details sound emission and vibration levels according to standards.
Statement of conformity with EU directives and standards.
Instructions for mounting protection guards for grinding and cutting.
Steps for mounting grinding discs, including SDS-clic nut.
Lists permissible speeds and dimensions for various grinding tools.
How to correctly connect to mains voltage and start the tool.
Instructions for operating the On/Off switch, including lock-on feature.
Covers Run-on Brake, Restarting Protection, and Reduced Starting Current.
Practical tips for cutting slots, clamping workpieces, and tool care.
Instructions for keeping the machine clean and well-maintained.
