English | 11
1 609 92A 1DY • 7.9.15
Symbols
The following symbols are important for reading
and understanding the operating instructions.
Please take note of the symbols and their meaning.
The correct interpretation of the symbols will help
you to use the machine in a better and safer man-
ner.
Symbol Meaning
BHD-2/24 SDS+ BC+2
BHD-2/28 EC SDS+:
Rotary Hammer
Grey-marked area: Handle
(insulated gripping surface)
Article number
Read all safety warnings and all
instructions
Before any work on the machine
itself, pull the mains plug from
the socket outlet
Wear protective gloves
Always wear ear protection.
Wear safety glasses/goggles
Movement direction
Reaction direction
Prohibited action
Permitted action
Next step of action
Right/left rotation
Drilling without impact
Hammer Drilling
Chiselling
Screwdriving
Position for changing the
position of the chisel
Switching On
Switching Off
On/Off switch lock-on
Releasing the On/Off switch
Low speed/impact rate
High speed/impact rate
Tool holder
Apply a light coat of grease to
the shank end of the application
tool
P
1
Rated power input
EImpact energy per
strokeaccording to
EPTA-Procedure 05/2009
n
0
No-load speed
Ø Drilling diameter, max.
Concrete
Steel
Wood
Brickwork
Core bit
Weight according to
EPTA-Procedure 01:2014
Protection class
Symbol Meaning
OBJ_BUCH-1726-002.book Page 11 Monday, September 7, 2015 10:51 AM
To Next Page
Loading...
Need help?
General
