To Next PageTo Next Page
Need help?Do you have a question about the Berner BHD-2/24 SDS+ BC+2 and is the answer not in the manual?
General| Drill type | Rotary Hammer |
|---|---|
| Power source | Corded Electric |
| Chuck type | SDS+ |
| Voltage | 230 V |
| Power | 800 W |
| No-load speed | 0 - 1100 rpm |
| Max drilling diameter (concrete) | 24 mm |
| Max drilling diameter (wood) | 30 mm |
| Max drilling diameter (steel) | 13 mm |
General safety warnings for operating power tools, covering electric shock, fire, and injury.
Guidelines for maintaining a safe and clear work environment to prevent accidents.
Precautions related to power tool plugs, outlets, grounding, and cord usage.
Advice on staying alert, using PPE, and avoiding distractions while operating tools.
Guidance on proper power tool usage, maintenance, and care to ensure safety.
Symbols indicating tool functions, modes of operation, and controls.
Symbols conveying essential safety instructions and warnings for user protection.
Symbols representing technical specifications and performance data of the tool.
Symbols related to tool maintenance, accessory handling, and general usage guidance.
Steps for choosing and fitting the correct drill chuck for the tool.
Procedure for detaching the quick change chuck from the tool.
Instructions for fitting the quick change chuck onto the tool.
Guide on how to correctly insert SDS-plus drill bits and accessories.
Method for safely removing SDS-plus drilling tools from the chuck.
How to attach round shank accessories to the tool.
How to switch between drilling, hammer drilling, and chiselling modes.
Adjusting the angle or orientation of the chisel bit.
How to reposition the auxiliary handle for better control.
Setting the depth stop for controlled drilling depth.
How to operate the trigger switch and adjust the tool's speed.
Procedure to engage the lock-on feature for continuous operation.
Method to deactivate the switch lock and turn the tool off.
