14 | English
1 609 92A 1DY • 7.9.15
Maintenance and Cleaning
For safe and proper working, always keep the
machine and ventilation slots clean.
If the replacement of the supply cord is necessary,
this has to be done by Berner or an authorized
Berner service agent in order to avoid a safety haz-
ard.
After-sales Service and Application
Service
In all correspondence and spare parts orders,
please always include the 6-digit order number giv-
en on the nameplate of the machine.
Accessories
Disposal
The machine, accessories and packaging should
be sorted for environmental-friendly recycling.
Do not dispose of power tools into household
waste!
Only for EC countries:
According to the European Guide-
line 2012/19/EU for Waste Electrical
and Electronic Equipment and its
implementation into national right,
power tools that are no longer usa-
ble must be collected separately and
disposed of in an environmentally correct manner.
Subject to change without notice.
Switching on and off and
setting the speed
11 151
Locking-on the On/Off switch
12 151
Releasing the On/Off switch
13 151
Action Figure Please observe Page
Article number
Keyless Chuck 13 mm 34115
SDS-plus quick change chuck 34114
OBJ_BUCH-1726-002.book Page 14 Monday, September 7, 2015 10:51 AM
To Next Page
Loading...
Need help?
General
