Need help?Do you have a question about the Berner DETECTOR-1 MULTI-FINDER and is the answer not in the manual?
General| Type | Multi-detector |
|---|---|
| Detection mode | Metal, AC voltage, Wood |
| Metal detection depth (max) | 80 mm |
| AC voltage detection depth (max) | 50 mm |
| Wood detection depth (max) | 20 mm |
| Power source | Battery |
| Power Supply | 9V battery |
| Operating Temperature | 0°C to 40°C |
| Alarm Type | Visual and audible indicators |
Specifies the tool's purpose: detecting metals, joists, and live wires in walls, ceilings, and floors.
Instructions for opening the battery lid, inserting, and checking battery status.
Procedure for turning the measuring tool on and off, and automatic shut-off.
Detailed steps for moving the tool, interpreting indicators, and using fine scale for precise detection.
Mode for detecting wood/metal in drywalls; indicates all object types.
How to mark detected objects using the marking hole.
Indicator for tool temperature affecting measurement accuracy.
Indication for restarting measurement or sending tool for service.
Instructions for checking, cleaning, and maintaining the measuring tool.
To Next Page