Need help?Do you have a question about the Bernina 932 and is the answer not in the manual?
General| Needle System | 130/705H |
|---|---|
| Bobbin Type | Class 15 |
| Free Arm | Yes |
| Weight | 7.5 kg |
| Built-in Stitches | 23 |
Instructions for removing the top, front, belt, and chassis covers.
Ensuring correct needle penetration in the stitch hole.
Adjusting the link and stitch position (L-V2, L-C-V2, R-R).
Ensuring the needle does not move sideways in its rest position.
Checking lateral needle movement during stitch width adjustments.
Adjusting stitch position for zig-zag sewing.
Matching needle's sideways motion to its up/down movement.
Setting the lifter strap for correct range of adjustment.
Setting the notched carrier for individual decorative stitches.
Aligning the notched segment with cams for stitch selection.
Adjusting stitch distribution using cam control.
Ensuring lateral needle motion matches zig-zag settings.
Checking and adjusting tracer support for straight and zig-zag stitches.
Setting the loop lift for correct loop formation.
Setting the final needle height after loop lift adjustment.
Setting the needle stop position and performing a stop test.
Checking and adjusting upper thread tension using a setting weight.
Checking and adjusting lower thread tension using a bobbin case weight.
Flowcharts for diagnosing and resolving motor-related problems.
Flowcharts for diagnosing issues like machine not running or lamp not lighting.
Flowcharts for diagnosing faulty LED indications.
To Next Page