Need help?Do you have a question about the Bernina Record 930 Electronic and is the answer not in the manual?
General| Operation | Electronic |
|---|---|
| Stitches | 20 |
| Built-in Needle Threader | Yes |
| Speed Control | Yes |
| Free Arm | Yes |
| Bobbin Type | Class 15 |
| Stitch Length | 0-4 mm |
| Needle Positions | Variable |
| Accessories | various presser feet, bobbins, needles, seam ripper, screwdriver |
| Power | 110V |
| Type | Electronic sewing machine |
| Presser Feet | Multiple, including zipper and buttonhole feet |
Connects the machine to the power supply and foot control.
Explains the functions of the three-position power switch.
Details the d.c. motor and its penetrating power.
Explains the automatic needle positioning feature.
Steps for safely removing the bobbin case from the machine.
Guide to winding thread onto the bobbin correctly.
Instructions for inserting the wound bobbin case into the hook.
Procedure for correctly inserting the sewing needle.
Steps to safely remove and attach presser feet.
Method for bringing the lower thread up to the needle plate.
How to lower the feed-dog for specific sewing tasks.
Guide to setting the correct thread tension for sewing.
Details uses for standard presser feet like 000, 007, 016, etc.
Guidance on selecting the correct needle size for different threads.
Information on ball-point, stretch, and jeans needles.
How to sew forwards and in reverse to secure seams.
Methods for reinforcing the beginning and end of seams.
Using the needle position knob for stitch placement.
Adjusting stitch width and length for zig-zag.
Instructions for creating satin stitch and dense zig-zags.
Techniques for neatening raw fabric edges.
Advice on needles, thread, and testing stitches for knits.
How to attach rib-trim using a decorative seam.
Method for attaching rib-trim using an overlock seam.
Creating a visible hem using the jersey stitch.
Applying a visible hem with the vari-overlock stitch.
Making a visible hem with the triple zig-zag stitch.
Tips for sewing plastic and leather materials.
Initial setup and preparation for sewing buttonholes.
Step-by-step guide to sewing a buttonhole.
Procedure for sewing buttonholes with added gimp cord.
Common checks to perform if the machine isn't working correctly.
Identifies reasons for upper thread snapping.
Identifies reasons for lower thread snapping.
Diagnosing and fixing common stitch errors and needle issues.
Crucial safety rules to observe during machine operation and maintenance.
To Next Page
